LiveZilla Live Chat Software
Texsteam TA-2265 View full size

The image may not always be an accurate representation of the product.

free shipping

Texsteam TA-2265

4300 Pump Motors: 1/4 HP Electric Motor 1750 RPM, Ball Bearing with Thermal Overload,1Ph, 56 Frame EXP. Proof, Single Phase, 115/230 Volt, 60 Hertz

More details

Texsteam

 New

35 LBS

TA-2265

*Availability: 2-4 Weeks

$940.93


4300 Pump Motors: 1/4 HP Electric Motor 1750 RPM, Ball Bearing with Thermal Overload,1Ph, 56 Frame EXP. Proof, Single Phase, 115/230 Volt, 60 Hertz

DESCRIPTION
The series 4300 chemical injectors are electric motor driven, positive displacement pumps utilizing an integral worm gear drive available in three different standard ratios and 6 plunger sizes to provide a wide selection of volumes and pressures .063 GPD up to 325 GPD per head, against pressures from 150 to 5000 psig. An optional 10 to 1 gear reducer, mounted externally, is available for extra low pumping rates from 1-1/4 gallons per day down to 1/2 pint per day.
Pumps are standard with a micrometer type stroke adjustment that puts an end to the tedious work of stopping and starting the pump while trying to set the proper flow rate. A 0-100% change in capacity is possible while the pump is running. Each complete turn of the knob results in a 10% change in stroke setting.Repeatable accuracy is 1% of set point. Up to eight heads driven by a common motor are possible, and each head can be independently adjusted.
The standard, virtually trouble free packed plunger injector heads have built-in priming valves and a drip-ring type barrier that will prevent chemicals from being conducted along the plunger and into the gear box. Standard pumps can be furnished with high strength ductile iron or all stainless steel liquid ends to handle a wide variety of chemicals used in oil and gas production facilities, pipelines, process plants and other applications where a rugged, easy to maintainproportioning pump is required.
FEATURES
• Integral gear drive and crosshead mechanism in heavy cast iron housing with an oil level sight gauge.
• Output gear of high strength alloy iron is supported in a sturdy special bearing arrangement for maximum rigidity to assure extremely long fife.
• A special drip-ring feature on the plunger prevents chemical from being conducted into the gear box and contaminating the lubricant.
• Oil level gauge on gear box.
• A full gasket under the gear box cover provides a positive barrier against moisture, dirt, and corrosive vapors.
• Choice of liquid ends all interchangeable.
• Multiplex models with up to 8 heads driven by a common motor are available.
• Stainless steel tanks
• Flow rate is adjustable while the pump is running.
Download Datasheet
 

No customer comments for the moment.

Only registered users can post a new comment.

3 other products in the same category: